This morning I got an early start, and was able to install the new fuel pump and tank before lunch. I made a new pigtail harness for the pump, reusing the old grommet which was still relatively soft. I also reused the big donut grommet for the filler pipe. I purchased the butyl putty at Home Depot and used a little more than half of the roll.
 |
| A clone of a Bosch 044 fuel pump; when I replace the tank she'll get the real-deal. |
 |
| The fuel lines looked clean on the inside. |
 |
| Butyl putty applied |
 |
| Tank installed with new wiring. |
 |
| After adding 2 gallons of gas, the gauge needle went to the reserve mark. |
